Grundig Digta 7 Premium BT Set with DigtaSoft Pro Manuel d'utilisateur télécharger pdf (Page 25)

Trouble shooting

Electrical devices can bring along malfunctions. These malfunctions cannot necessarily be referred to the device. You can check if you

can remedy the errors by means of the following table.

Malfunctions Possible reasons Removal of defect

The devices cannot be switched on. The battery is empty.

The current supply is interrupted.

Charge the batteries or exchange them.

(see chapter “Charging of rechargeable batteries”)

The device is unresponding to slide

switch- and button operations.

The keylock is activated. Press the lower function button until the keylock is deactivated.

There is no sound or too quiet. The microphone sensitivity or the play-back

volume are not set correctly.

Set the microphone sensitivity in the menu “recording” to

“conference” or hold the device closer to your mouth during

recording.

Set up the play-back volume. (see chapter “Setting the

volume”)

The sound is distorted or too loud. The microphone sensitivity or the play-back

volume are not set correctly.

Set the microphone sensitivity in the menu “recording” to “dic-

tation” or increase the distance between the device and your

mouth during recording.

Turn down the play-back volume. (see chapter “Setting the

volume”)

No menu function available. The device is running in the Easy Mode. Switch over to the Menu Mode. (see chapter “Change of

profile”)

1 2 ... 20 21 22 23 24 25 26 27

Pas de commentaire

Grundig Digta 7 Premium BT Set with DigtaSoft Pro Manuel d'utilisateur Page 25